| HEXAGON Scan Arms - RA8 - 7-axis with AS1 Scanner |  RA8 Arm |  AS1 Scanner |
|
HEXAGON Scan Arms - RA8 - 7-axis with RS6 Scanner
|  RA8 Arm
| 
RS6 Scanner |
|
HEXAGON Scan Arms - RA8 - 7-axis with RS5 Scanner
|  RA8 Arm
|  RS5 Scanner |
|
| HEXAGON PC-DMIS for bridge and gantry CMMs |   |
| HEXAGON Tactile Arms - RA8 - 6-axis - Ball Probes |  RA8 Arm - 6 axis |  Ball probe |
|
HEXAGON Tactile Arms - RA8 - 6-axis with HP-L-8.9 Scanner
(Works - but not recommended for tube scanning because of lack of articulation compared to 7-axis arms) |  RA8 Arm - 6 Axis |  HP-L-8.9 Scanner |
|
HEXAGON LEICA Absolute Tracker with Scanner
|  LEICA Tracker | 
AS1 Scanner |
 |
HEXAGON LEICA Absolute Tracker with T-Probe
| 
LEICA Tracker | 
LEICA T-Probe |
|
HEXAGON LEICA Absolute Tracker with Reflectors
(Reflectors act like ball probes)
|  LEICA Tracker | 
LEICA Reflectors |
|
ROMER RA7 Scan Arm
Also known as the ROMER ABSOLUTE ARM - 7 series (with a model formed like 73xx SI)
Uses the RS3 Scanner |  RA7 Arm |  RS3 Scanner |
|
HEXAGON RA7 Arms - HP-L-20.8 Scanner
|  ROMER ABSOLUTE 7 | 
HP-L-20.8 Scanner
|
|
| NOT Compatible with the Fork Probes |  |
| FARO Scan Arms - EDGE - Scanner |  |
FARO Scan Arms - EDGE - Ball Probe
|  |
| FARO Scan Arm - Quantum S Max |  |
FARO Scan Arm - Quantum S - Ball probe
|  |
| FARO Scan Arm - Quantum |  |
| FARO GAGE (New model only) |  Newer model - Works with VTube-LASER | 
Older model - Does not connect to VTube-LASER |
|
| FARO Platinum - Scanner or Ball Probe |  |
| FARO Quantum (Older Version) - Scanner or Ball Probe |  |
| FARO Prime - Scanner or Ball Probe |  |
| FARO Fusion - Scanner or Ball Probe | |
| FARO Advantage - 6 Axis - Ball Probe | |
| Kreon 7 axis with scanner or ball probe | |
| Kreon 6 axis with ball probe | |
| Kreon BACES Arm - Ball Probe | 
|
| MicroScribe Arm from Revware |  |
| Metronor LightPen |  Metronor LightPen |
| CREAFORM - Import point clouds created by CREAFORM using VTube-LASER "point cloud" arm |  CREAFORM HandySCAN 3D (Also, other models are supported) |
| ARTEC - Import point clouds created by ARTEC using the VTube-LASER "point cloud" arm |  ARTEC Eva and Eva Lite (Also other models are supported) |
| SHINING 3D - Import STL files from SHINING 3D scanners and measure them using the VTube-LASER point cloud arm. |
  |
