VTube-LASER Bender Communications
AddisonMckee
Control: Mark IV or higher controls
Protocol: Supravision Network
Physical Connection: Standard Ethernet
Special hardware: None
Additional charges for link: $1000 per bender to enable this protocol
AIM Wire Benders
Control: AIM
Protocol: AIM Supravision Network
Physical Connection: Standard Ethernet
Special hardware: None
AIM charge for link: SmartEditor® CMM connection option for $9,980 per bender
Alpine
Control: Alpine (The Alpine distributor in the Americas is UTE.)
Protocol: DAF File Data Transfer for new parts and Supravision Network protocol for Bidirectional bender correction using the Master Convert license.
Physical Connection: Standard Ethernet
Special hardware: None
Additional charges for link: Contact UTE for details. (Phone: 423.282.0404)
AMOB
Control: AMOB
Protocol: VTL Data File Transfer for new parts and corrections for unidirectional bender correction
Physical Connection: Standard Ethernet
Special hardware: None
Additional charges for link: Unknown - contact AMOB for charges to enable this option.
Knowledgebase Details Read details about the VTube-LASER to AMOB link on this knowledgebase page.
BLM Group
Control: VGP-3D
Protocol: Supravision Network
Connection: Ethernet
Special Hardware: None
Additional charges: The cost is about $5000 per bender. Ask for BLM part number SW0453.
Chiyoda
Control: Chiyoda or KEINS
Protocol: Proprietary Benderlink for Chiyoda and KEINS RS232 protocol/software
Physical Connection: Proprietary Serial from Chiyoda
Special hardware: Custom serial cable
Additional charges for link: Requires Benderlink for Chiyoda and KEINS software. See the Benderlink for Chiyoda Online Store option.
CMP Automation
Control: CMP MCS (Machine Control Software)
Protocol: CMP Supravision Network using FTP (File Transfer Protocol)
Special Hardware: None
Additional charge for link: Unknown
COMCO
Control: COMCO - Windows based
Protocol: VTube-LASER modifies CSV files exported and imported by the COMCO control
Physical Connection: Standard Ethernet
Special hardware: Only a Network
Additional charges for link: None
CRIPPA
Control: CRIPPA
Protocol: Supravision Network
Physical Connection: Standard Ethernet
Special hardware: None
Additional charges for link: Unknown
Knowledgebase Details Read details about the VTube-LASER to CRIPPA link on this knowledgebase page.
CSM
Control: CSM
Protocol: CSM File Data Transfer
Physical Connection: Standard Ethernet
Special hardware: None
Additional charges for link: No
Eaton Leonard - Premier
Control: Premier
Protocol: Eaton Leonard Legacy Serial Current Loop
Physical Connection: Network and Serial cables
Additional charges for link: Benderlink module from Advanced Tubular. See https://www.advancedtubulartech.com/product-page/benderlink-ethernet-module
Also see knowledgebase information: Benderlink Ethernet Modules for Eaton Leonard,
Eaton Leonard - Lightspeed
Control: Lightspeed
Protocol: Supravision Network
Physical Connection: Standard Ethernet
Special hardware: None
Additional charges for link: Unknown
Flecte
Control: BendPro (when purchased from RbSA, rbsaindustrial.com)
Protocol: Supravision Network
Physical Connection: Standard Ethernet
Special hardware: None
Additional charges for link: Unknown
HERBER
Control: HERBER
Protocol: HERBER MES+SOL
- HERBER SOL File for sending NEW PART data
- HERBER MES File for bender CORRECTION
Physical Connection: Standard Ethernet
Special hardware: None
Additional notes: HERBER technicians have tested and confirmed that the HERBER MES+SOL protocol works,
Horn Machine Tools (HMT)
Control: CurrentTech BendPro Controlled Benders
Protocol: Supravision Network
Physical Connection: Standard Ethernet
Special hardware: None
Additional charges for link: Yes. Contact HORN for prices.
KEINS
Control: KEINS MQ85 Touchscreen
Protocol: Proprietary Benderlink for Chiyoda and KEINS RS232 protocol/software
Physical Connection: Proprietary Serial from KEINS
Special hardware: Custom serial cable
Additional charges for link: Requires Benderlink for Chiyoda and KEINS software. See the Benderlink for KEINS Online Store option.
MachMotion
Control: MachMotion
Protocol: Supravision Network
Physical Connection: Standard Ethernet
Special hardware: None
Additional charges for link: $2000 per bender to enable this protocol
MiiC
Control: MiiC
Protocol: Proprietary MiiC BSC Protocol through Benderlink for MiiC
Physical Connection: Network and Serial cables
Special hardware: Benderlink Ethernet Module at each bender
Additional charges for link: Requires Benderlink for MiiC software. MiiC technicians come on-site to change the firmware to enable MiiC communications (extra charge). See the Benderlink for MiiC at the online store.
Morris Solutions
Control: Morris Solutions (VTube Distributors in Benelux)
Protocol: Supravision Network FTP (File Transfer Protocol)
Physical Connection: Standard Ethernet
Special hardware: None
Additional charges for link: Unknown
PINES Technology
Control: TS-2000
Protocol: Supravision Network
Physical Connection: Standard Ethernet
Special hardware: None
Additional charges for link: There is a charge to enable this option for each bender. Check with PINES for the price.
NUMALLIANCE Benders
Control: NUMALLIANCE
Protocol: NUMALLIANCE CSV Files
Physical Connection: Standard Ethernet or Thumb drive
Special hardware: No
Additional charges for link: There is a charge to enable bender corrections. Check with NUMALLIANCE for the price.
SMI
Control: Silver 3
Protocol: SMI Data File Transfer
Physical Connection: Standard Ethernet
Special hardware: None
Additional charges for link: None
SMT Industries
Control: Advanced Tubular CNC Bender ProControl v12
Protocol: Supravision Network - See Benderlink for CNC Bender ProControl
Physical Connection: Standard Ethernet
Special hardware: None
Additional charges for link: There is a charge for adding this option. Check with SMT for the price.
SOCO Machinery
Control: SOCO Control
Protocol: SOCO SVNet Protocol - See VTube Communication with SOCO for more information.
Physical Connection: Standard Ethernet
Special hardware: None
Additional charges for link: None
STARBEND
Control: STARBEND Control
US Distributor: ITEC
Protocol: Imports Supravision files
Physical Connection: Standard Ethernet
Special hardware: None
Additional charges for link: None
Techno Industrial Machinery
Control: CurrentTech BendPro Controlled Benders
Protocol: Supravision Network
Physical Connection: Standard Ethernet
Special hardware: None
Additional charges for link: $1500 per bender (through CurrentTech)
Transfluid
Control: Transfluid T control
Protocol: Supravision Network
Physical Connection: Standard Ethernet
Special hardware: None
Additional charges for link: Unknown
Tulip/Roboflex
Control: Tulip/Roboflex control
Protocol: Supravision Network
Physical Connection: Standard Ethernet
Special hardware: None
Additional charges for link: Unknown
Tube-Line Technologies
Control: CurrentTech BendPro Controlled Benders
Protocol: Supravision Network
Physical Connection: Standard Ethernet
Special hardware: None
Additional charges for link: Yes. Contact Tube-Line Technologies for prices.
Unison Limited
Control: Unison
Protocol: Supravision Network
Physical Connection: Standard Ethernet
Special hardware: None
Additional charges for link: None (This was confirmed with Unison)
Universal Tool & Engineering
Control: BendPro and Alpine
Protocol: For BendPro: Supravision Network. For Alpine: DAF File Data Transfer for new parts and Supravision Network protocol for Bidirectional bender correction using the Master Convert license.
Physical Connection: Standard Ethernet
Special hardware: None
Additional charges for link: Yes. Contact UTE for details. (Phone: 423.282.0304)
VLB
Control: VLB Proprietary
Protocol: Supravision Network Protocol
Physical Connection: Standard Ethernet
Special hardware: Unknown
Additional charges for link: Unknown
WAFIOS
Control: Wafios
Protocol: Supravision Network Protocol
Physical Connection: Standard Ethernet
Special hardware: None
Additional charges for link: Unknown
Winton Machine Company
Control: Winton
Protocol: VTube-LASER's Winton File Data Transfer
Physical Connection: Standard Ethernet
Special hardware: None
Additional charges for link: None
YLM
Control: YLM
Protocol: VTube-LASER's YLM Supravision File
Physical Connection: Standard Ethernet
Special hardware: None
Additional charges for link: Unknown